Analog output MPNC035
The MPNC035 product is an expansion module for analog outputs.
The MPNC035 module has 4 independent and individually programmable analog outputs for generation of voltage, current and PWM outputs.
This module can be used as extension of PLC (TPAC) / operator panels (TP) and any other panel that has a Modbus or CANopen communication protocol.
Depending on the communication interface it is necessary to add a "head" to communicate with panel: MPNC010 for CANopen protocol and MPNC006 for Modbus protocol.
Up to 16 analog and digital modules can be added in the same line.
- 0÷10V: 0÷10000 - minimum load 1Kohm
- 4÷20mA: 0÷20000 - maximum load 500ohm
- PWM: fixed frequency 250Hz - output impedance 10Kohm
Resolution: 12 bit
Precision: 0,5% FS
Power supply: 24Vdc ±15%, 0.65W (without loads)
Dimensions: 115(l)x115(h)x(22.5mm depth)
Working temperature: 0-50°C
HMI monitor with 4.3" touch-screen and PLC with integrated inputs/outputs. Digital: 8 inputs/outputs configurable and 4 inputs, Analog: 2 inputs and 1 outputs.Modbus RTU, TCP, TCPRTU.
HMI monitor with 7" touch-screen and PLC with integrated inputs/outputs. Digital: 8 inputs and 12 outputs, Analog: 4 inputs and 2 outputs. Modbus RTU, TCP, TCPRTU and CANopen.
HMI monitor with 7" touch-screen and PLC with integrated inputs/outputs. Digital: 28 inputs and 20 outputs, Analog: 4 inputs and 4 outputs, 5 Encoder and 3 load cells.
MPCV015 signal converter (analog input converter) with 1500V of triple galvanic isolation.
4.3" touch-screen HMI with PLC embedded. Equipped with Modbus RTU protocol or CANopen; Modbus TCP and TCPRTU on Ethernet interface.
7" touch-screen HMI with PLC embedded. Equipped with Modbus RTU protocol and CANopen (optional); Modbus TCP and TCPRTU on Ethernet interface.