Pannello PLC con HMI Monitor Touch-Screen 4,3" TPAC1007 04
Based on an ARM9 architecture, the TPAC1007 is a PLC with human-machine interface device with 4.3" touch-screen which integrates the QT graphics libraries. The operator panel with PLC can be supplied with horizontally or vertically monitor. "MECT SUITE" softwares are OpenSource.
On the PLC operator panel TPAC1007 there are input/output analogue and digital: 4 Analog inputs, 2 Analog outputs, 4 PNP Digital inputs or 1 Bidirectional Encoder inputs and 8 PNP software configurable digital I/O.
The PLC operator panel TPAC1007 is equipped with inputs and outputs both analog and digital , Modbus RTU over RS485 , Modbus TCP and TCPRTU on Ethernet interface.
The micro USB port is used as a host for datalogging and software update, or as a device for mass storage. On PLC operator panel TPAC1007 can be installed a micro SD memory card up to 64 GB, for programs and data.
To configure your PLC operator panel TPAC1007 is available the "MECT SUITE" software.
"MECT SUITE" contains the software to configure the system and to create the PLC and HMI graphics applications:
- Generate graphics HMI application (graphics pages);
- Generation and definition of the system variables;
- Configuration of the communication parameters;
- Operator Panel preliminary setting;
- Easy insertion of elements associated to PLC variables;
- Ready pages for recording / logging;
- Use, if necessary, Qt / C++ code;
- HMI application debug.
- Generation PLC application (in 5 IEC 61131-3 languages);
- In addition to several libraries are available those of PID and Self-tuning;
- PLC application debug.
On PLC operator panel TPAC1007 up to 192 retentive variables are available (the value is maintained during the power off of the HMI) and more than 4800 not retentive variables.
VERTICAL VERSION AVAILABLE.
Operative system: LINUX Real Time
Graphic libraries: QT
PLC: programmable with 5 standard languages IEC61131-3, application monitor for debugger
Setup() & Loop(): possibility to write your own application only in hMI environment (C/C++)
Modbus RTU / TCP/ TCPRTU (master/slave)
Datalogger, Trend, Recipes, Alarms
Wi-Fi and Mobile network management by optional USB pen drive
Remote connection Open Vpn
SFTP Secure Server (Win SCP)
MySQL/SQLite database access
Easily obtain log values within web based applications (HTTP + JSON)
CASE: plastic molding housing
DISPLAY: 4,3" 480x272 TFT 262k colours
CPU: processor ARM926 32 Bits 454 MHz
DRAM: 128 MB DDR2
FLASH: 128 MB
MASS STORAGE: 64 GB Micro SD (FAT format and only partition)
- 1 Ethernet port (10/100 Base-T)
- 1 Micro USB 2.0 host port
- 1 RS485 2 wires
|Option A||Option B||Option C||Configurations Inputs/Outputs|
|2||2||2||Analog inputs 0÷10V, 0÷20mA, 4÷20mA, PT100, J, K, T, S, B, R|
|2||2||1||Analog outputs 0÷10V, 0÷20mA, 4÷20mA, PWM @250Hz|
|2||2||---||Analog outputs 0÷10V, PWM @250Hz|
|8||8||8||Programmable digital inputs/outputs|
|---||3||---||Analog inputs 0÷10V|
* As an alternative A and C option: 1 input mono/bidirectional encoder and 2 digital inputs
See ACIN01 product for relay outputs.
Power supply: 12÷36Vdc, 250mA
Dimensions: 80 x 156 x 37 mm (H x L x W)
Mounting plate: 68 x 127 mm
Display: TFT LCD
Luminance (cd/m2): 400
Operating temperature: 0°/+50°C
Storage temperature: -20°/+60°C
Relative humidity: 10%-90%@40°C
Protection: IP65 on the front panel
ADDITIONAL INPUT AND OUTPUT
If you need to use the remote input/output modules you can use the following models:
HMI monitor with 7" touch-screen and PLC with integrated inputs/outputs. Digital: 8 inputs and 12 outputs, Analog: 4 inputs and 2 outputs. Modbus RTU, TCP, TCPRTU and CANopen.
HMI monitor with 7" touch-screen and PLC with integrated inputs/outputs. Digital: 28 inputs and 20 outputs, Analog: 4 inputs and 4 outputs, 5 Encoder and 3 load cells.
4.3" touch-screen HMI with PLC embedded. Equipped with Modbus RTU protocol or CANopen; Modbus TCP and TCPRTU on Ethernet interface.